Vibrating Feeder

Introduction:

Vibrating Feeder is a kind of feeding equipment that can bring bulk, granular and powdery materials from the warehouse or funnel to the receiving equipment continuously or quantitatively in the production process. It can stepless adjust feeding amount and realize the centralized control and automatic control. It can feed material for belt conveyor, bucket elevator, vibrating machinery, crusher, pulverizer etc.

Application :

Vibrating Feeder can be widely used in crushing and screening equipment of metallurgy, coal, mineral separation, construction materials, chemical industry, abrasive and other industries.

Advantages:

1. High efficiency, low operating costs

Vibrating Feeder has high efficiency because its amplitude is stable enough to ensure the liquidity of vibration materials so that can reduce the channel blockage phenomenon. Its structure is simple. Therefore, there are little vulnerable parts. Also, it can save more energy because the power consumption is very low. 

2. High adaptability, low investment

Vibrating Feeder has high adaptability that can work at dusty or moist environment. And the volume is small, the weight is light. Also, the cost performance is high because less investment can gain more.

3.Low noise, little pollution

The noise of machine is low. Through the closed structure,it can prevent dust pollution.

The Installation and Maintenance of Vibrating Feeder

1. The vibrating feeder is used for dosing, quantitative feeding to ensure uniform and stable feeding and to prevent material flow automatically, the vibrating feeder should be horizontal installed; For general material continuous feeding, it can be installed down-dip 10; For viscous material or material with larger water content ,the vibrating feeder can be installed down-dip 15.

2. After installation, it should leave with 20 mm of interval for vibrating feeder, the suspension device adopts flexible connection.

3. Before test run, all bolts should be tighten up, especially the anchor bolt of vibration motor, it shall be retightened after continuously operation for 3 to 5 hours .

4. The two vibrating motors must rotate in reverse during test run, if there is any abnormal phenomenon, please stop immediately and solve the problem.

5. During operating, the amplitude, current of vibration motor and surface temperature of motor should be regularly checked . The front and back amplitude must be uniform and no side shaking, the current of vibrating motor should be stable, if there is any abnormal phenomenon, please stop immediately and solve the problem.

6. The lubrication of vibration motor bearing is the key point for the normal operation of the whole feeding machine. The second-rate molybdenum 2 # grease should be refilled periodically on the bearing, normally fill the grease every two months, and fill once a month during the high temperature season. The motor should be repaired every six months to change the internal bearing.

For more information, pls do not hesitate to contact us via : 

Web:http:www.pkmachinery.com

Mobilephoe:+86 18338953783

Tel: +86 373 579 9198

Fax: +86 373 507 1699

Address: 289 Yellow River Road, Xinxiang City, Henan Province, China